The ultimate mATX Intel P45 based chipset motherboard you can find!

Specifications:

CPU
# LGA 775 socket for: – Intel® CoreTM2 Quad and Intel® CoreTM2 Duo
# Supports Intel Enhanced Memory 64 Technology (EMT64T)
# Supports Enhanced Intel SpeedStep Technology (EIST)
# Supports Intel Hyper-Threading Technology
# Supports 1333/1066/800MHz FSB

Chipset
# Intel® chipset – Northbridge: Intel® P45 Express chipset Intel® Fast Memory Access technology – Southbridge: Intel® ICH10R

System Memory
# Four 240-pin DDR2 DIMM sockets
# Supports DDR2 667/800/1066 MHz
# Delivers up to 12.8Gb/s bandwidth
# Supports dual channel (128-bit wide) memory interface
# Supports up to 8GB system memory
# Supports unbuffered x8 and x16 DIMMs

Expansion Slots
# 2 PCI Express (Gen 2) x16 slots – 2-way CrossFire: One slot operating at x8 (8-lane port) or two slots each operating at x8 (8-lane ports) bandwidth
# 1 PCI Express x1 slot
# 1 PCI slot

BIOS
# Award BIOS
# 8Mbit SPI flash BIOS
# CMOS Reloaded

Audio
# Realtek ALC885 High Definition audio CODEC
# 8-channel audio output
# DAC SNR/ADC SNR of 106dB/101dB
# Full-rate lossless content protection technology
# Optical S/PDIF-out and coaxial RCA S/PDIF-out interfaces

LAN
# Marvell 88E8053 PCIE Gigabit LAN controller
# Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) and 802.3ab (1000BASE-T) standards

Serial ATA with RAID
# Intel Matrix Storage technology
# Supports up to 6 SATA devices
# SATA speed up to 3Gb/s
# RAID 0, RAID 1, RAID 0+1 and RAID 5

IDE
# JMicron JMB368 PCI Express to PATA host controller
# Supports up to 2 UltraDMA 33/66/100Mbps IDE devices

Rear Panel I/O
# 1 mini-DIN-6 PS/2 mouse port
# 1 mini-DIN-6 PS/2 keyboard port
# 1 optical S/PDIF-out port
# 1 coaxial RCA S/PDIF-out port
# 6 USB 2.0/1.1 ports
# 1 RJ45 LAN port
# Center/subwoofer, rear R/L and side R/L jacks
# Line-in, line-out (front R/L) and mic-in jacks

Internal I/O
# 3 connectors for 6 additional external USB 2.0 ports
# 1 connector for an external COM port
# 1 front audio connector
# 1 CD-in connector
# 1 IrDA connector
# 6 Serial ATA connectors
# 1 40-pin IDE connector
# 1 floppy connector
# 1 24-pin ATX power connector
# 1 8-pin 12V power connector
# 1 front panel connector
# 3 fan connectors
# 1 download flash BIOS connector
# EZ touch switches (power switch and reset switch)

Power Management
# ACPI and OS Directed Power Management
# ACPI STR (Suspend to RAM) function
# Wake-On-PS/2 Keyboard/Mouse
# Wake-On-USB Keyboard/Mouse
# Wake-On-LAN
# Wake-On-Ring
# RTC timer to power-on the system
# AC power failure recovery

Hardware Monitor
# Monitors CPU/system/Northbridge temperature and overheat alarm
# Monitors Vcore/Vdimm/Vnb/VCC5/12V/V5sb/Vbat voltages
# Monitors the speed of the cooling fans
# CPU Overheat Protection function monitors CPU temperature and fan during system boot-up – automatic shutdown upon system overheat

PCB
# 4 layers, microATX form factor
# 24.5cm (9.64″) x 24.5cm (9.64″)

All specifications above are subject to change without prior notice.

=====

Previous Entries:
Unboxed: DFI LAN Party JR P45-T2RS mATX Motherboard
Sneak Preview: DFI LAN Party JR P45-T2RS mATX Motherboard

=====

Manufacturer’s Page: Click Here

The actual box pictured:

Opening the box pictured above reveals another (much simpler) box:

Opening the box, we see the bundle (manuals, drivers, UV reactive orange cables, etc..)

Tease… tease… tease… here’s a shot of the motherboard still in the static bag:

And finally…

That’s about it. Hope you enjoyed the unboxing as much as I did. This is probably one of the first (if not the first) actual retail stock of the DFI LAN Party JR P45-T2RS mATX motherboard pictured.

It should be available worldwide and in your country real soon.

Bu the way, here’s a bonus shot with the room lights turned off and illuminated with a Sunbeam 12″ Dual UV CCFL kit:

Pretty cool eh?