=====

Application: High end high performance VGA cooler for ATI / nVIDIA graphics cards!
Model Name: Musashi VGA Cooler
Model #: SCVMS-1000
Dimension: 104 x 250 x 35 mm (Overall); 100 x 100 x 12 mm (Fan)
Fan Speed: 800 ~ 2,000 upm
Noise Level: 12.50 ~ 29.22 dBA
Airflow: 11.45 ~ 27.60 CFM
Weight: 375 g
Status: Discontinued

=====

Features:

High Compatibility
The Musashi is compatible with almost all graphic cards on the market. 23 supplied Chipset Heatsinks provide optimal flexibility.

Dual Independent Fan with Controller
Equipped with dual Scythe original super thin “Kaze Jyu Slim 100mm” fan, users can independently control each fan speed to fulfill the demand for silent to over-clocking purposes.

Perfect Airflow
The special design of cooling fin architecture provides optimal cooling of VGA cards using low fanspeeds.

=====

Compatibility:

ATI:
Radeon 9*** / X*** / X1300 / X1600 / X1650 / X1800 / X1900 / X1950 / HD2600 / HD2900XT / HD3650 / HD3850 / HD3870 / HD4850 / HD4870
*Not compatible with ATi RADEON 9550/9600

nVIDIA:
GeForce FX5900 / 6600 / 6800 / 7300 / 7600 / 7800 / 7900 / 8500 / 8600 / 8800GT / 8800GTS / 9600 / 9800GT / 9800GTX / 9800GTX+
*Not compatible with nVIDIA GeForce 6600 AGP

=====

Product Shots:

Box…

Back…

With nVIDIA 7900GS attached…

Installed on the DFI LAN Party JR P45-T2RS mATX Motherboard…

Able to attach another VGA card on the second slot without interference from the Scythe Musashi…

=====

Manufacturer’s Page: Click Here

=====

Application: High performance thermal compound for your hot processors!

Color: White
Volume: 4.8 ml
Thermal impedance: 0.047
Life expectancy after use: 12 months
Status: Discontinued

=====

Features:

# Electrical impedance and thermal resistant
# Contains no health hazardous chemical and non-electrical conductive
# Easy application, spreads easily, and easy to clean
# Contains minuscule thermally conductive particles to fill air gaps with just right amount of consistency that’s not too fluidal and not too thick to prevent CPU from being pulled off its socket during removal of heatsink.
# Generous volume and competitively priced

=====

Manufacturer’s Page: Click Here

=====

Application: High performance cooler for AMD processors!

Heat Sink: 104 x 58 x 126.5 mm
Fan: 107 x 43.5 x 96 mm
Overall Dimensions: 107 x 96.5 x 126.5 mm
Rated Fan Speed: 900-2200 RPM (PWM)
Bearing: Ceramic Bearing
Power Consumption: 0.16 Amp.
Air Flow: 40 CFM / 68 m3/h
Weight: 528 g
Noise Level: 0.8 Sone
Thermal Resistance: 0.18°C/Watt
Thermal Interface Material: Pre-applied MX-1 / MX-2 Paste
Status: Discontinued

=====

Compatibility:

Up to 130 Watts
AMD Socket AM2+, AM2, 939, 754
- All Athlon 64 X2, Athlon 64
- All Athlon 64 FX, Sempron
- Opteron

=====

Manufacturer’s Page: Click Here

Beat the heat of your graphics cards with this!

=====

Application: High performance cooler for your graphics cards!

=Accelero S1 Rev.

2=
Heat Sink: 138(L) x 215(W) x 33(H) mm
Heat pipe: 6 mm x 4
Weight: 268 g

=Turbo Module=
Fan: 80 x 80 x 15 mm (each)
Fan Speed: 1500 RPM
Air Flow: 42 CFM
Bearing: Sleeve Bearing
Plug: 3 pin plug (with power plug convertor)
Weight: 35 g (each)

Status: Discontinued

=====

Compatibility:

ATI:
Radeon HD 4850/4870, Radeon HD 38xx series, 36xx series, 2600, 2400, X1950, X1900, X1800, X1650, X1600, X1550, X1300 series

nVIDIA:
GeForce 9800GTX+, 9800GTX, 9800GT, 9600 GT, 8800GTS(G92), 8800GT, 8600, 8500, 8400, 7950GT, 7900, 7800, 7600, 7300, 6800, 6600 series (except 7X00 GS AGP)

=====

Product Shot:

=====

Manufacturer’s Page:
Accelero S1 Rev. 2
Turbo Module

=====

Application: Budget priced Intel / AMD CPU Cooler
Heat Sink: 78(L) x 98(W) x 56(H) mm
Fan: 113(L) x 101(W) x 47.2(H) mm
Overall Dimension: 113(L) x 101(W) x 91.7(H) mm
Rated Fan Speed: 900 – 2000 RPM (controlled by PWM signal)
Bearing: Fluidic Dynamic Bearing
Power Consumption: 0.15 Amp.
Air Flow: 36 CFM / 62 m3/h
Weight: 486 g
Noise Level: 0.6 Sone
Thermal Resistance: 0.26°C/Watt
Thermal Interface Material: Pre-applied MX-1 / MX-2 Paste
Service Life: MTTF at 40°C: 400,000 h
Status: Discontinued

=====

Compatibility:

Up to 90 Watts
Intel LGA775 Socket:
- Intel Core 2 Extreme X6800
- All Intel Core 2 Duo
- All Intel Pentium Dual-Core
- Up to Intel Pentium 4 661 (65 nm)
- Up to Intel Pentium 4 650 (90 nm, stepping R0 or later)
- Up to Intel Pentium 4 551 (90 nm, stepping E0 or later)
- Up to Intel Pentium 4 3.2GHz
- All Intel Celeron D
AMD Socket AM2, 939, 754
- Up to Athlon 64 X2 5600+,
- Up to Athlon 64 FX-53
- All Athlon 64, All Sempron
- Opteron

=====

Manufacturer’s Page: Click Here

=====

Application: Cools your memory!

Product code: AK-171 BL
Dimension: 125 x 26 x 4.5mm
Retaining clips: 2
Status: Discontinued

=====

Features:

# Hi-grade aluminium heatsink for PC RAM
# Designed for DDR 1/2/3 & SDRAM
# Suitable for double and single sided modules
# Hi-grade thermal tape transfers heat rapidly
# Tool free installation

=====

Manufacturer’s Page: Click Here

=====

Use: Cool lookin’ lighted PC case fan
Available Colors: Blue
Fan Dimension: 80 x 80 x 25 mm
Rated Fan Speed: 2500 RPM
Fan Air Flow: 28.76 CFM
Fan Air Pressure: 2.43mm H20
Fan Noise Level: 27.45 dB(A)
Fan Life Expectancy: 30000/hrs
Bearing Type: Sleeve
Connector: 3-pin with RPM sensor wire
Voltage Rating: 12V
Included Bundle: 4x Case Screws, 3-4pin Adapter
Status: Discontinued

=====

Manufacturer’s Page: Click Here